Inductors specially designed for strip heating

Fives has developed innovative technologies for strip heating and metal sheets line treatment that makes it easier to install the inductor in production systems and improves process characteristics.
Fives designed the inductors to achieve the highest performance and provide:
- Higher productivity through transient management (format changes, etc.) for solid transverse uniformity
- Excellent flexibility
- Low maintenance and a long lifecycle for the machinery
- High power density and increased thermal efficiency
- Compact heating equipment
- A high-precision process
Fives developed inductors and IGBT and MOSFET generators for strip heating.
A wide range of power generators with IGBT and MOSFET transistors
IGBT generator frequency range: 0.5-50 kHz
MOSFET generator frequency range: 10-400 kHz
Superior operational flexibility by only using digitally-controlled MOSFET and IGBT transistors. Local or remote network control via MODBUS, PROFIBUS or ETHERNET connection depending on the type of automation.
Inductors specially designed for strip heating
Fives Celes inductors meet the EN 12198 standard and are designed with electromagnetic shielding.
Possible applications:
• Baking/drying coatings
Temperatures: 90-300°C
For drying anti-fingerprint products, paints with or without solvents, silicon steel enamels
Solution designed for lines with speeds above 180 M/minute
• Galvanizing line heating (pre-zinc pot heating, heat-to-coat process)
Temperatures: 450-500°C
Heating in a reducing atmosphere
• Booster: Increasing furnace power
Temperatures: 20-600°C
In reducing or air atmosphere
Improved performance with compact machinery with a small footprint
• Weld bead annealing
Temperatures: 20-700°C
For steels with high elasticity limits and silicon steels
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here