Transverse flux heating tests

Printable Version


Fives has developed a demonstrator that can conduct industrial-scale experiments with CELES EcoTransFlux transverse flux heating technology.

The demonstrator gives industrial operators an opportunity to test out CELES EcoTransFlux™ performance in real-life conditions.

You can test the equipment's performance on your flat products in a fully controlled environment.

Depending on the width (900-1,550 mm) and thickness of the strip, it can reach temperatures of up to 850°C and heat at a speed of up to 100°C per second. The demonstrator can treat any type of nonmagnetic sheet metal. 

When the experiment is complete, it generates a detailed report on the testing conditions. Fives can also offer metal analysis on treated coils or rapid-cycle heat tests (200-400°C/sec.) on carbon steel samples.

The ideal solution for the steel industry: CELES EcoTransFlux

Gas or electrical resistance is typically used to heat steel strips during continuous annealing. These technologies heat slowly at about 70°C/second, have low thermal efficiency levels of around 50%, and produce NOX or CO2 emissions.

After years of research and development in conjunction with EDF and Usinor and with support from the Ademe and the French Ministry of Industry, Fives is now able to offer a high-density inductor that meets the special requirements of the steel industry:

⇒  Metal heating at temperatures above the Curie point (760°C) with over 3 MW of inductor-injected power in the steel strip

⇒  A quick-response heating system with low thermal inertia for extremely rapid temperature increases

⇒  Thermal efficiency above 75%

⇒  Patented electromagnetic devices and coils that provide temperature consistency of +/-10°C for any format.


transverse flux test-FIVES

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.

* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent